df
For in-air annealing, we have HFSX350-GI from Linkam (UK company).
It is fully integrated to beamline software (SPEC) and measurements will be similar to what you normally did before.
For controlled environment, special lid should be made. The body (HFSX350-GI) can be water cooled and has gas-in and gas-out ports.
If you can make a lid, full operando might be possible.
- Temperature range: -196°C to 350°C
- Heating Rate 30°C per minute
- Temperature stability <0.1°C
- 100ohm platinum resistor sensor
